FL Studio: Removing Vocals from a Song Made Easy

/ by admin

FL Studio is a popular digital audio workstation that allows users to create, edit, and produce music. One of the most sought-after features of FL Studio is its ability to remove vocals from a song. This feature is handy for DJs and remix artists who want to create their versions of popular songs without the vocals.

A computer screen with the FL Studio interface open, showing the steps to remove vocals from a song

Removing vocals from a song can be a challenging task, especially if you’re not familiar with the software. However, with FL Studio, the process is relatively simple. There are several methods you can use to remove vocals from a song, including using the Edison plugin, the Fruity Stereo Shaper plugin, and the Vocal Reduction and Isolation plugin. Each method has its own advantages and disadvantages, and it’s important to choose the right one for your needs.

Understanding Vocal Removal

A music software interface with a song waveform displayed. A highlighted vocal track with a "remove vocals" button activated

The Basics of Vocal Frequencies

When it comes to removing vocals from a song, it’s important to understand the basics of vocal frequencies. Vocals typically occupy a range of frequencies between 100 Hz and 10 kHz, with the bulk of the energy concentrated between 1 kHz and 4 kHz. This frequency range is commonly referred to as the “vocal range.”

In order to remove vocals from a song, it’s necessary to identify and isolate these frequencies. There are a few different methods for doing so, which will be discussed in the following section.

Isolation vs. Cancellation

There are two main approaches to removing vocals from a song: isolation and cancellation. Isolation involves identifying the frequencies that are unique to the vocals and filtering them out, leaving behind the instrumental track. This can be done using a variety of tools, such as EQ plugins or specialized vocal removal software.

Cancellation, on the other hand, involves creating a second track that is the exact opposite of the vocal track in terms of phase and amplitude and then combining the two tracks in a way that cancels out the vocals. This method is more difficult to execute but can be more effective in some cases.

It’s important to note that neither approach is foolproof, music editor and there will always be some residual vocals left in the final mix. However, with careful use of the appropriate tools and techniques, it’s possible to achieve a satisfactory result.

FL Studio Tools for Vocal Removal

FL Studio is a popular digital audio workstation that has a range of tools for editing and manipulating audio files. One of the most common tasks in audio editing is removing vocals from a song, and FL Studio has several tools to help achieve this.

Using Edison

Edison is a powerful audio editing tool in FL Studio that can be used to remove vocals from a song. To use Edison for vocal removal, first, load the song into Edison by dragging and dropping the audio file onto the Edison window. Next, select the area of the song that contains vocals using the selection tool. Then, right-click on the selection and choose “Tools” > “Vocal Remover”. This will apply a vocal removal effect to the selected area of the song.

Applying EQ Filtering

Another way to remove vocals from a song in FL Studio is by applying EQ filtering. This involves using an equalizer to remove the frequencies that are associated with vocals. To do this, first, load the song into FL Studio and add an EQ plugin to the mixer track. Then, use the EQ to cut the frequencies that are associated with vocals. This will result in a version of the song with the vocals removed.

Utilizing Stereo Shaper

The Stereo Shaper plugin in AudioStretch FL Studio can also be used to remove vocals from a song. This plugin works by manipulating the stereo image of the audio, which can be used to remove vocals that are panned to the center of the stereo field. To use Stereo Shaper for vocal removal, first, load the song into FL Studio and add the Stereo Shaper plugin to the mixer track. Then, adjust the settings to widen the stereo image and reduce the center channel. This will result in a version of the song with the vocals removed.

Overall, FL Studio has several tools that can be used for vocal removal, including Edison, EQ filtering, and Stereo Shaper. By using these tools, users can achieve high-quality vocal removal and create new versions of their favorite songs.

Step-by-Step Vocal Removal Process

Removing vocals from a song can be a challenging task, but with FL Studio, it can be done with ease. Here is a step-by-step process to remove vocals from a song using FL Studio:

Importing the Track

The first step is to import the track into FL Studio. This can be done by clicking on the “File” menu and selecting “Open.” Once the track is imported, it will appear in the Playlist.

Identifying Vocal Elements

Next, it is important to identify the vocal elements in the track. This can be done by listening to the track and identifying the parts where the vocals are present. It is recommended to use a pair of headphones to identify the vocals more accurately.

Applying Effects to Remove Vocals

Once the vocal elements are identified, the next step is to apply effects to remove the vocals. One way to do this is to use the “Fruity Parametric EQ 2” plugin. This plugin allows the user to isolate specific frequencies and remove them from the track.

To remove the vocals, the user can use the “Fruity Parametric EQ 2” plugin to identify the frequencies where the vocals are present and then remove them. This can be done by selecting the frequency range where the vocals are present and reducing the volume to zero.

Another way to remove the vocals is to use the “Fruity Stereo Shaper” plugin. This plugin allows the user to adjust the stereo image of the track. By reducing the stereo image of the vocals, the user can effectively remove them from the track.

Removing vocals from a song can be a challenging task, but with FL Studio, it can be done with ease. By following the step-by-step process outlined above and using the appropriate plugins, users can effectively remove vocals from any track.

Advanced Techniques and Tips

Mid-Side Processing

One advanced technique for removing vocals from a song in FL Studio is mid-side processing. Soundlab audio editor involves separating the audio signal into its mid and side components, then applying processing to the side component to reduce or remove the vocal frequencies. This technique can be effective in cases where the vocals are panned to the center of the stereo field.

To use mid-side processing for vocal extraction in FL Studio, follow these steps:

  1. Insert a stereo imager plugin on the track containing the song you want to remove vocals from.
  2. Set the imager to mid-side mode.
  3. Use the imager’s controls to adjust the balance between the mid and side components of the signal.
  4. Apply EQ or other processing to the side component to reduce or remove the vocal frequencies.
  5. Adjust the balance between the mid and side components as needed to achieve the desired result.

Using Plugins for Vocal Extraction

Another approach to removing vocals from a song in FL Studio is to use plugins specifically designed for this purpose. There are several plugins available that use advanced algorithms to analyze the audio signal and separate the vocals from the instrumental elements.

One popular plugin for vocal extraction in FL Studio is iZotope RX. This plugin includes a feature called Music Rebalance, which allows you to adjust the levels of individual elements in a mix, including vocals. To use Music Rebalance for vocal extraction, follow these steps:

  1. Insert the iZotope RX plugin on the track containing the song you want to remove vocals from.
  2. Open the Music Rebalance feature.
  3. Adjust the vocal slider to reduce or remove the vocal element from the mix.
  4. Use the other sliders to adjust the levels of other elements in the mix as needed.

Another plugin that can be used for vocal extraction in FL Studio is XTRAX STEMS by Audionamix. This plugin uses artificial intelligence to separate vocals, drums, and other elements from a mix. To use XTRAX STEMS for vocal extraction, follow these steps:

  1. Insert the XTRAX STEMS plugin on the track containing the song you want to remove vocals from.
  2. Use the plugin’s controls to adjust the separation settings.
  3. Export the separated vocal track as a new audio file.

Overall, there are several advanced techniques and plugins available for removing vocals from a song in FL Studio. By experimenting with different approaches and tools, producers can achieve high-quality results and create unique remixes and mashups.

Troubleshooting Common Issues

Dealing with Residual Vocals

One common issue that users may encounter when removing vocals from a song in FL Studio is residual vocals. This occurs when some vocals are still audible even after applying the vocal removal process. To address this issue, users can try the following:

  • Adjusting the vocal removal settings: FL Studio provides several options for vocal removal, including the center channel extractor and the stereo shaper. Users can experiment with these settings to find the best combination that removes the most vocals without affecting the instrumental quality.
  • Using EQ to remove residual frequencies: If there are still some vocal frequencies present, users can use an equalizer to remove them. They can use a parametric EQ to isolate the vocal frequencies and then cut them out of the mix.
  • Layering instrumental tracks: Another option is to layer the instrumental tracks to create a fuller sound that masks any residual vocals. Users can experiment with different instrument combinations to find the best mix that works for their song.

Improving Clarity of Instrumentals

Another issue that users may encounter when removing vocals from a song is a loss of clarity in the instrumental tracks. To address this issue, users can try the following:

  • Using EQ to boost instrumental frequencies: Users can use an equalizer to boost the frequencies of the instrumental tracks that they want to stand out. This can help to create a fuller sound and improve the clarity of the instrumental tracks.
  • Adding effects to instrumental tracks: Users can experiment with different effects, such as reverb or delay, to create a more dynamic sound and improve the clarity of the instrumental tracks.
  • Adjusting the levels of instrumental tracks: Users can adjust the levels of the instrumental tracks to create a better balance between them. This can help to prevent any one track from overpowering the others and create a more cohesive sound.

By following these troubleshooting tips, users can improve the quality of their instrumental tracks and address any issues that may arise when removing vocals from a song in FL Studio.